Invisible Dog Fencing Bruderheim AB

TheFreedomFence.com now offers installation, repair and servicing of All Brands of pet and dog fence systems in Bruderheim AB and Western Canada. Choosing the right underground dog fence for your dog can be confusing because of the wide variety of electronic pet fences available. A quality in-ground dog fence is sold by Pet Stop®, PetSafe®, Pet Guardian®, Invisible Fence ™ ®, DogWatch®, Dog Guard®, Innotek®, and DogTek® and comes in different styles for different types of dogs and are ideal for climate found in and around Bruderheim AB.

Electric Dog Fence Installation

 

Even though an invisible, underground, wireless or other electric dog fence systems cannot be seen or touched, they do a fairly good job in keeping your dog safe within the exterior areas of your demarcated property. These unique dog containment systems are designed to prevent your dog from straying, being a nuisance to your neighbors and staying safe from accidents or attacks by other animals. It is not only an innovative way to keep your dog safe, but will also save you a lot of money compared to installing a traditional fence in Bruderheim AB. Moreover, they will also give your home and garden a cleaner, more aesthetic look.

If you find that a traditional fence is beyond your budget, or if such a fence contravenes rules laid down by your neighborhood community, then installing any type of invisible dog fencing system would be the best option. There are some highly effective fences available today, so you can easily choose one that suits your needs and budget.

One of the most popular options available today is the “radio electric” dog fence. It is designed for the sole purpose of deterring your dog from moving out of the demarcated areas of your Bruderheim AB property or acreage. The invisible dog fence involves the use of two main components – a transmitter and a receiver (radio collar).

Perimeter Dog Collar

 

Our Current Dog Fencing Product & Service Offerings in Bruderheim AB include: Wireless Dog Fencing, Dog Fence Underground, Electric Dog Fence For Large Dog, Invisible Fencing For Dogs, Wireless Invisible Dog Fence, Wireless Invisible Dog Fence, Invisible Fence Cats, Invisible Electric Fence For Dogs, Underground Dog Fencing, Hidden Dog Fence, Invisible Dog Fence Companies, Cat Invisible Fence, Invisible Dog Fence Installation, Electronic Fencing For Dogs, Invisible Pet Fence, Large Dog Invisible Fence, Outdoor Containment Fence For Dogs, Invisible Fence Alternative, Cat Containment System, Wireless Invisible Fence For Dogs, Perimeter Wireless Dog Fence, Dog Containment Collar, Invisible Dog Fence Installation, Wireless Dog Fencing, Invisible Dog Fencing, Small Dog Invisible Fence

How the Dog Fences Works?

The fence has an electric wire fitted with a transmitter and installed underground all around the borders of your acreage or Bruderheim AB property. This fence system works by giving out a beeping signal which is received by your dog’s radio collar, each time it (the dog) gets too close to the fence. If your dog continues to ignore the signals, a mild static shock is delivered via its collar to stop it from crossing the fence. However, the shock frequency can be adjusted to limit fear or harm to your dog.

 

Are Electronic Dog Fences Legal in Bruderheim AB?

Radio Dog Fence

 

So you want to install an underground dog fence and avoid paying the $1,500+ that a big national franchise like an Invisible Dog Fence, Dog Watch or Pet Stop installer would charge? Here's how you can do a DIY install of a dog containment system for a fraction of the cost in just three steps.

First, we will install the Dog Fence Controller and test that everything works. We want the controller to be located close to a power outlet and sheltered from the elements, most people put it in a garage. Attach the controller box to the wall and drill a small hole through the wall. Run the twisted wire that came with your system from the controller box outside to the perimeter of your property. Now run the single strand wire around the property joining each end of the single strand to the twisted pair with the provided wire splices. Now switch on the system and check that everything works well.

Second, we bury the wire. The fastest way to bury wire is to use a trencher with a cable laying attachment. This tool cuts through your soil, lays the boundary wire and then backfills. You can rent a trencher at bigger tool rental stores, the cost is modest (under $50) and the time savings is huge. The rental store clerk will show you how to best use the trencher when you go to pick it up. But basically, you will feed the boundary wire through the trencher and tie one end of the wire to a stake in the ground. You will then start the trencher, engage the cutting blade and drive it around your property. Now that the wires are buried you should reconnect the system and again check that everything still works.

Third, we set up the Dog Containment System. The Dog Fence Controller will have a dial to let you adjust the field width. This controls how far from the boundary wire the collars start beeping and delivering the correction. Adjust the field width so that the field width is between one and two yards. A bigger field width will keep your dog safer but also reduces the amount of space in which they can play. Owners with bigger yards and more stubborn dogs should aim for a wider field width and owners with smaller properties and more compliant dogs should head toward the narrower end of that range. Now mark the edge of the field with the provided flags, spaced out at two yard intervals. Perform a final check of the system, and check that the collar beeps whenever you move it past the flags.

Congratulations your dog fence has been successfully installed!

 

How to Keep a Dog From Breaking Out of Or Escaping an Invisible Underground Dog Fence?

Electronic Dog Fencing

 

Electronic dog fences are becoming a very popular solution to the problem of wandering dogs. There are now literally dozens of different brands and models available, some are very high quality and some are simply rubbish. All of the systems available are potential nightmares when they fail to work as you expected. In most cases there is a simple fix for your problem. A few simple tests are all you need to find and correct the fault.

Fault finding in an electronic fence can be a frustrating and time-consuming exercise as often the problem is a combination of faults. Imagine trying to find a bad connection of the boundary wire to the controller by using a collar with a low battery. This will give all sorts of false and confusing results. The way to tackle your problem is to break the fence system down into its 3 main parts and then test each part separately. The 3 parts we will be testing are:

Transmitter or Controller

Boundary Wire

Collar Receiver

Transmitter.

The best way to test your transmitter is to disconnect your boundary wire and connect at least 30 feet (10 meters) of new wire. Lay the wire out in a circle and make sure to twist the last 3 feet (1 meter) before it connects to the transmitter. Turn on the transmitter and check the "power LED" is illuminated. If the power LED does not come on you have 1 of 2 problems. The power supply (usually a 12 volt plug pack) unit has failed or the transmitter is faulty. If you have a multimeter you can test the output from the power supply to determine if it is working. It is also a good idea to test the power supply in a different power outlet.

The transmitter should also have the "loop indicator " illuminated. An illuminated power LED but no illuminated loop indicator LED indicates the transmitter is faulty and needs to be replaced or returned for repairs. Double check that you have stripped enough insulation from the ends of the boundary wires and that they are making a good contact with the transmitter.

The next step is to disconnect one of the boundary wires, this should produce the break indicator warning, normally a flashing light and an audible alarm tone. If you do not get an alarm to indicate a wire break, the transmitter is faulty.

Boundary Wire.

Now that we know the transmitter is working we can reconnect the boundary wire. The boundary wire is the simplest of all to test but the most frustrating to fix. The transmitter power LED and the loop indicator LED should be illuminated. A break indicator alarm will confirm that the boundary wire has been broken. Your problem now is to find the break in the wire, if the wire has been buried this can be a difficult exercise. Locating and repairing a wire break will be covered in a future article.

Receiver Collars.

The first thing to do when testing a collar is to replace the battery with a fresh one. In the case of rechargeable collars this can be a difficult and expensive exercise. Make sure the collar is fully charged and is holding it's charge, rechargeable batteries do not last forever and often they have a life span of less than 18 months. Low or flat batteries will result in confusing and inconsistent performance.

Test the collar on a straight section of your fence that is well away from the controller. Approach the fence while holding the collar in your hand.

The orientation and height of the collar above the ground can make a big difference to its response distance. Hold the collar with the probes at 45 degrees to horizontal and at roughly the same height from the ground as it would be when the dog is wearing it. The collar should sound a warning as you approach the wire. Common problems are listed below.

The collar has to be held on top of the boundary wire to activate:

Adjust the boundary width control knob on the transmitter to increase the distance from the boundary wire that the collar activates. If your transmitter has a Boundary Control Switch, adjust it to another setting. Make sure your boundary wire loop is separated by at least 3 feet (1 meter).

The collars give an inconsistent response:

Make sure your transmitter is located well away from large metal objects like freezers and washing machines. Check that your boundary wire corners are gradual as sharp corners will cancel the signal. Make sure the boundary wire is not running parallel to and within 4-6 feet (2 meters) of underground electrical cables, telephone lines, neighboring electronic fences, etc.

The dog is not responding to correction:

Test the collar with the supplied test light to make sure it is working correctly.

Adjustable collars may be set to low for your dog, increase the level setting.

Adjust the collar fit.

Shave the area of the dog's skin that is in contact with the probes.

Try longer probes especially on long-haired dogs.

Following the steps above should enable you to identify which part of your system is at fault and allow you to take appropriate action. It is very important that a faulty fence system is repaired as quickly as possible. A faulty or inconsistent fence will quickly lose your dogs respect and retraining a dog can be very difficult.


http://thefreedomfence.com/alberta/ – TheFreedomFence.com now offers installation, repair and servicing of All Brands of pet and dog fence systems in Bruderheim AB. WE PROUDLY SERVICE ALL BRANDS OF ELECTRIC FENCE SYSTEMS LIKE: Pet Stop®, PetSafe®, Pet Guardian®, Invisible Fence ™ ®, DogWatch® and Dog Guard®.