Invisible Electric Fence For Dogs Canmore AB

TheFreedomFence.com now offers installation, repair and servicing of All Brands of pet and dog fence systems in Canmore AB and Western Canada. Choosing the right underground dog fence for your dog can be confusing because of the wide variety of electronic pet fences available. A quality in-ground dog fence is sold by Pet Stop®, PetSafe®, Pet Guardian®, Invisible Fence ™ ®, DogWatch®, Dog Guard®, Innotek®, and DogTek® and comes in different styles for different types of dogs and are ideal for climate found in and around Canmore AB.

Best In Ground Dog Fence

 

Even though an invisible, underground, wireless or other electric dog fence systems cannot be seen or touched, they do a fairly good job in keeping your dog safe within the exterior areas of your demarcated property. These unique dog containment systems are designed to prevent your dog from straying, being a nuisance to your neighbors and staying safe from accidents or attacks by other animals. It is not only an innovative way to keep your dog safe, but will also save you a lot of money compared to installing a traditional fence in Canmore AB. Moreover, they will also give your home and garden a cleaner, more aesthetic look.

If you find that a traditional fence is beyond your budget, or if such a fence contravenes rules laid down by your neighborhood community, then installing any type of invisible dog fencing system would be the best option. There are some highly effective fences available today, so you can easily choose one that suits your needs and budget.

One of the most popular options available today is the “radio electric” dog fence. It is designed for the sole purpose of deterring your dog from moving out of the demarcated areas of your Canmore AB property or acreage. The invisible dog fence involves the use of two main components – a transmitter and a receiver (radio collar).

Electric Perimeter Fence For Dogs

 

Our Current Dog Fencing Product & Service Offerings in Canmore AB include: Wireless Dog Fencing, Dog Fence Underground, Electric Dog Fence For Large Dog, Invisible Fencing For Dogs, Wireless Invisible Dog Fence, Wireless Invisible Dog Fence, Invisible Fence Cats, Invisible Electric Fence For Dogs, Underground Dog Fencing, Hidden Dog Fence, Invisible Dog Fence Companies, Cat Invisible Fence, Invisible Dog Fence Installation, Electronic Fencing For Dogs, Invisible Pet Fence, Large Dog Invisible Fence, Outdoor Containment Fence For Dogs, Invisible Fence Alternative, Cat Containment System, Wireless Invisible Fence For Dogs, Perimeter Wireless Dog Fence, Dog Containment Collar, Invisible Dog Fence Installation, Wireless Dog Fencing, Invisible Dog Fencing, Small Dog Invisible Fence

How the Dog Fences Works?

The fence has an electric wire fitted with a transmitter and installed underground all around the borders of your acreage or Canmore AB property. This fence system works by giving out a beeping signal which is received by your dog’s radio collar, each time it (the dog) gets too close to the fence. If your dog continues to ignore the signals, a mild static shock is delivered via its collar to stop it from crossing the fence. However, the shock frequency can be adjusted to limit fear or harm to your dog.

 

Are Electronic Dog Fences Legal in Canmore AB?

Wireless Fence System

 

Electronic dog fences are becoming a very popular solution to the problem of wandering dogs. There are now literally dozens of different brands and models available, some are very high quality and some are simply rubbish. All of the systems available are potential nightmares when they fail to work as you expected. In most cases there is a simple fix for your problem. A few simple tests are all you need to find and correct the fault.

Fault finding in an electronic fence can be a frustrating and time-consuming exercise as often the problem is a combination of faults. Imagine trying to find a bad connection of the boundary wire to the controller by using a collar with a low battery. This will give all sorts of false and confusing results. The way to tackle your problem is to break the fence system down into its 3 main parts and then test each part separately. The 3 parts we will be testing are:

Transmitter or Controller

Boundary Wire

Collar Receiver

Transmitter.

The best way to test your transmitter is to disconnect your boundary wire and connect at least 30 feet (10 meters) of new wire. Lay the wire out in a circle and make sure to twist the last 3 feet (1 meter) before it connects to the transmitter. Turn on the transmitter and check the "power LED" is illuminated. If the power LED does not come on you have 1 of 2 problems. The power supply (usually a 12 volt plug pack) unit has failed or the transmitter is faulty. If you have a multimeter you can test the output from the power supply to determine if it is working. It is also a good idea to test the power supply in a different power outlet.

The transmitter should also have the "loop indicator " illuminated. An illuminated power LED but no illuminated loop indicator LED indicates the transmitter is faulty and needs to be replaced or returned for repairs. Double check that you have stripped enough insulation from the ends of the boundary wires and that they are making a good contact with the transmitter.

The next step is to disconnect one of the boundary wires, this should produce the break indicator warning, normally a flashing light and an audible alarm tone. If you do not get an alarm to indicate a wire break, the transmitter is faulty.

Boundary Wire.

Now that we know the transmitter is working we can reconnect the boundary wire. The boundary wire is the simplest of all to test but the most frustrating to fix. The transmitter power LED and the loop indicator LED should be illuminated. A break indicator alarm will confirm that the boundary wire has been broken. Your problem now is to find the break in the wire, if the wire has been buried this can be a difficult exercise. Locating and repairing a wire break will be covered in a future article.

Receiver Collars.

The first thing to do when testing a collar is to replace the battery with a fresh one. In the case of rechargeable collars this can be a difficult and expensive exercise. Make sure the collar is fully charged and is holding it's charge, rechargeable batteries do not last forever and often they have a life span of less than 18 months. Low or flat batteries will result in confusing and inconsistent performance.

Test the collar on a straight section of your fence that is well away from the controller. Approach the fence while holding the collar in your hand.

The orientation and height of the collar above the ground can make a big difference to its response distance. Hold the collar with the probes at 45 degrees to horizontal and at roughly the same height from the ground as it would be when the dog is wearing it. The collar should sound a warning as you approach the wire. Common problems are listed below.

The collar has to be held on top of the boundary wire to activate:

Adjust the boundary width control knob on the transmitter to increase the distance from the boundary wire that the collar activates. If your transmitter has a Boundary Control Switch, adjust it to another setting. Make sure your boundary wire loop is separated by at least 3 feet (1 meter).

The collars give an inconsistent response:

Make sure your transmitter is located well away from large metal objects like freezers and washing machines. Check that your boundary wire corners are gradual as sharp corners will cancel the signal. Make sure the boundary wire is not running parallel to and within 4-6 feet (2 meters) of underground electrical cables, telephone lines, neighboring electronic fences, etc.

The dog is not responding to correction:

Test the collar with the supplied test light to make sure it is working correctly.

Adjustable collars may be set to low for your dog, increase the level setting.

Adjust the collar fit.

Shave the area of the dog's skin that is in contact with the probes.

Try longer probes especially on long-haired dogs.

Following the steps above should enable you to identify which part of your system is at fault and allow you to take appropriate action. It is very important that a faulty fence system is repaired as quickly as possible. A faulty or inconsistent fence will quickly lose your dogs respect and retraining a dog can be very difficult.

 

What is an Invisible Dog Fence and How Does it Work?

Hidden Fence For Dogs

 

As pet owners, we take the safety and well being of our dogs seriously. We want to provide them with the freedom that they need and at the same time we want to keep them in the yard and away from the road or the neighbor's backyard. Using a wireless dog fence is a reasonable option, but there are others as well. Here are a few considerations to help you make your decision.

As advances are made in electronics, the containment options available to pet owners have improved considerably. There are now many possibilities worth considering, from electronic pet doors to a wireless dog fence. Nowadays, a physical fence is no longer needed to keep your dog in your yard.

In the past the most popular dog fence was the electric dog fence. This consists of a wire that is buried in the ground around the perimeter of your property with a small amount of electric current running through it. A shock device is then attached to the dog's collar so that when he attempts to cross over the wire he receives a shock and learns to stay inside the electric fence.

There has been some concern that such electrically charged fences make pets more aggressive and many dog owners shy away from using them. However, they are easier to install and less expensive than a physical fence. The wireless dog fence is another option that has been designed to eliminate some of the problems of the electric fence.

The wireless dog fence is the simplest means of containing a pet and is very simple to use. A transmitter is plugged in an outlet in the house that transmits a 17.5 kHz radio signal in a circle around the house. A light weight receiver collar is placed on the dog that picks up the signal. The dog can move freely about within the circle, but when he approaches the edge a warning beep sounds. If he does not retreat he will receive a static sound that will startle him but not hurt him.

This type of containment system works most effectively when combined with training. You can do so by placing visible flags around the boundary to help mark the edge of the circle. The dog easily learns to stay within the circle. One of the biggest advantages of this system is that it is portable. It can be used anywhere it is needed, inside or out.

If, for example, there is an area of the house that you would like to make off limits to your dog, use the wireless dog fence to teach him where he can and cannot go. Or, if you enjoy taking your dog camping with you, bring it along with you and you will not have to keep your dog on a tether. The collar that the dog wears is much smaller and lighter than the one required by an electric fence.

The wireless dog fence is the easiest of all containment systems to install and is less expensive than most. It does require a little extra time spent training the dog, but this can be an enjoyable project that could actually help you bond with your pet.


http://thefreedomfence.com/alberta/ – TheFreedomFence.com now offers installation, repair and servicing of All Brands of pet and dog fence systems in Canmore AB. WE PROUDLY SERVICE ALL BRANDS OF ELECTRIC FENCE SYSTEMS LIKE: Pet Stop®, PetSafe®, Pet Guardian®, Invisible Fence ™ ®, DogWatch® and Dog Guard®.