Wireless Dog Fencing Salmon Arm BC

TheFreedomFence.com now offers installation, repair and servicing of All Brands of pet and dog fence systems in Salmon Arm BC and Western Canada. Choosing the right underground dog fence for your dog can be confusing because of the wide variety of electronic pet fences available. A quality in-ground dog fence is sold by Pet Stop®, PetSafe®, Pet Guardian®, Invisible Fence ™ ®, DogWatch®, Dog Guard®, Innotek®, and DogTek® and comes in different styles for different types of dogs and are ideal for climate found in and around Salmon Arm BC.

Best In Ground Dog Fence

 

Even though an invisible, underground, wireless or other electric dog fence systems cannot be seen or touched, they do a fairly good job in keeping your dog safe within the exterior areas of your demarcated property. These unique dog containment systems are designed to prevent your dog from straying, being a nuisance to your neighbors and staying safe from accidents or attacks by other animals. It is not only an innovative way to keep your dog safe, but will also save you a lot of money compared to installing a traditional fence in Salmon Arm BC. Moreover, they will also give your home and garden a cleaner, more aesthetic look.

If you find that a traditional fence is beyond your budget, or if such a fence contravenes rules laid down by your neighborhood community, then installing any type of invisible dog fencing system would be the best option. There are some highly effective fences available today, so you can easily choose one that suits your needs and budget.

One of the most popular options available today is the “radio electric” dog fence. It is designed for the sole purpose of deterring your dog from moving out of the demarcated areas of your Salmon Arm BC property or acreage. The invisible dog fence involves the use of two main components – a transmitter and a receiver (radio collar).

Electric Perimeter Fence For Dogs

 

Our Current Dog Fencing Product & Service Offerings in Salmon Arm BC include: Wireless Dog Fencing, Dog Fence Underground, Electric Dog Fence For Large Dog, Invisible Fencing For Dogs, Wireless Invisible Dog Fence, Wireless Invisible Dog Fence, Invisible Fence Cats, Invisible Electric Fence For Dogs, Underground Dog Fencing, Hidden Dog Fence, Invisible Dog Fence Companies, Cat Invisible Fence, Invisible Dog Fence Installation, Electronic Fencing For Dogs, Invisible Pet Fence, Large Dog Invisible Fence, Outdoor Containment Fence For Dogs, Invisible Fence Alternative, Cat Containment System, Wireless Invisible Fence For Dogs, Perimeter Wireless Dog Fence, Dog Containment Collar, Invisible Dog Fence Installation, Wireless Dog Fencing, Invisible Dog Fencing, Small Dog Invisible Fence

How the Dog Fences Works?

The fence has an electric wire fitted with a transmitter and installed underground all around the borders of your acreage or Salmon Arm BC property. This fence system works by giving out a beeping signal which is received by your dog’s radio collar, each time it (the dog) gets too close to the fence. If your dog continues to ignore the signals, a mild static shock is delivered via its collar to stop it from crossing the fence. However, the shock frequency can be adjusted to limit fear or harm to your dog.

 

Are Electronic Dog Fences Legal in Salmon Arm BC?

Dog Electric Fence Kit

 

Electronic dog fences are becoming a very popular solution to the problem of wandering dogs. There are now literally dozens of different brands and models available, some are very high quality and some are simply rubbish. All of the systems available are potential nightmares when they fail to work as you expected. In most cases there is a simple fix for your problem. A few simple tests are all you need to find and correct the fault.

Fault finding in an electronic fence can be a frustrating and time-consuming exercise as often the problem is a combination of faults. Imagine trying to find a bad connection of the boundary wire to the controller by using a collar with a low battery. This will give all sorts of false and confusing results. The way to tackle your problem is to break the fence system down into its 3 main parts and then test each part separately. The 3 parts we will be testing are:

Transmitter or Controller

Boundary Wire

Collar Receiver

Transmitter.

The best way to test your transmitter is to disconnect your boundary wire and connect at least 30 feet (10 meters) of new wire. Lay the wire out in a circle and make sure to twist the last 3 feet (1 meter) before it connects to the transmitter. Turn on the transmitter and check the "power LED" is illuminated. If the power LED does not come on you have 1 of 2 problems. The power supply (usually a 12 volt plug pack) unit has failed or the transmitter is faulty. If you have a multimeter you can test the output from the power supply to determine if it is working. It is also a good idea to test the power supply in a different power outlet.

The transmitter should also have the "loop indicator " illuminated. An illuminated power LED but no illuminated loop indicator LED indicates the transmitter is faulty and needs to be replaced or returned for repairs. Double check that you have stripped enough insulation from the ends of the boundary wires and that they are making a good contact with the transmitter.

The next step is to disconnect one of the boundary wires, this should produce the break indicator warning, normally a flashing light and an audible alarm tone. If you do not get an alarm to indicate a wire break, the transmitter is faulty.

Boundary Wire.

Now that we know the transmitter is working we can reconnect the boundary wire. The boundary wire is the simplest of all to test but the most frustrating to fix. The transmitter power LED and the loop indicator LED should be illuminated. A break indicator alarm will confirm that the boundary wire has been broken. Your problem now is to find the break in the wire, if the wire has been buried this can be a difficult exercise. Locating and repairing a wire break will be covered in a future article.

Receiver Collars.

The first thing to do when testing a collar is to replace the battery with a fresh one. In the case of rechargeable collars this can be a difficult and expensive exercise. Make sure the collar is fully charged and is holding it's charge, rechargeable batteries do not last forever and often they have a life span of less than 18 months. Low or flat batteries will result in confusing and inconsistent performance.

Test the collar on a straight section of your fence that is well away from the controller. Approach the fence while holding the collar in your hand.

The orientation and height of the collar above the ground can make a big difference to its response distance. Hold the collar with the probes at 45 degrees to horizontal and at roughly the same height from the ground as it would be when the dog is wearing it. The collar should sound a warning as you approach the wire. Common problems are listed below.

The collar has to be held on top of the boundary wire to activate:

Adjust the boundary width control knob on the transmitter to increase the distance from the boundary wire that the collar activates. If your transmitter has a Boundary Control Switch, adjust it to another setting. Make sure your boundary wire loop is separated by at least 3 feet (1 meter).

The collars give an inconsistent response:

Make sure your transmitter is located well away from large metal objects like freezers and washing machines. Check that your boundary wire corners are gradual as sharp corners will cancel the signal. Make sure the boundary wire is not running parallel to and within 4-6 feet (2 meters) of underground electrical cables, telephone lines, neighboring electronic fences, etc.

The dog is not responding to correction:

Test the collar with the supplied test light to make sure it is working correctly.

Adjustable collars may be set to low for your dog, increase the level setting.

Adjust the collar fit.

Shave the area of the dog's skin that is in contact with the probes.

Try longer probes especially on long-haired dogs.

Following the steps above should enable you to identify which part of your system is at fault and allow you to take appropriate action. It is very important that a faulty fence system is repaired as quickly as possible. A faulty or inconsistent fence will quickly lose your dogs respect and retraining a dog can be very difficult.

 

Are Invisible Dog Fences Worth the Money?

Invisible Dog Fence System

 

A traditional way to "fence" in dogs and other animals is through the use of physically erected fences. There are supposed to prevent animals from entering and leaving the specified area. Some fences are equipped to release a current when touched. If you're worried your dog may never come home again from his neighborhood strolls, such a pet containment system is available. Some studies show, however, that a pet boundary control system, without the use of erected fences, tend to be more cost effective over time. Further, they're more preferred in areas where ordinances prohibit installing physical fences.

What is a fence without a fence?

It's simple, the goal is for your dog to keep inside your area. An electronic dog fence is a system wherein wires are buried around your area. Flags marks them, planted in measured intervals, but these are small flags not as visually intrusive as physical fences. The dog wears a collar that emits a warning sound when it nears the boundaries. The collar gives him a corrective shock whenever he exceeds that boundary. With some training, the dog realizes that he is not to go beyond the area wherein he hears the warning sound.

So even though there are no physically erected fences publicly visible, there might as well be, since the dog will keep inside the area marked by the flags. Naturally, any other animal (human beings included) who does not wear the collar, are unaffected by the virtual fence. Because of the space retain, or reclaimed, some dog owners choose an electronic dog fence to physical fences.

Other ways of keeping your pet inside a marked perimeter

There are alternative ways to this pet containment system's set up. One system offers an alternate set up - instead of buried wires, radio signals sent from a device take the form of a marked area. A designated radius replaces the buried wires, and when the dog nears the edge of that boundary, it receives a warning sound; should it continue to ignore that sound, a mild shock follow. Another system is possible via the use of the Global Positioning System, which some dog owners find more sophisticated compared to the other two. Should the dog try to ignore the warning sound, the static correction sets in - this is the same condition that applies for all three set ups: the buried wire, the radio signal set up, and the GPS system.

You can adjust or increase the intensity of the static correction the dog receives when it tries to get past the marker flags, and ignore the warning sounds. Remember that for you to get the most of this electronic dog fence, your dog must be trained and rewarded for a specified period, until it heeds the warning tones and static corrections, and stays inside the perimeter.

Worried about where your dog goes to? Why not look into setting up an electronic dog fence? With an electronic dog fence, not only will your dog stay in your area, but you won't have to install physical fences that might ruin your real estate's aesthetics.


http://thefreedomfence.com/british-columbia/ – TheFreedomFence.com now offers installation, repair and servicing of All Brands of pet and dog fence systems in Salmon Arm BC. WE PROUDLY SERVICE ALL BRANDS OF ELECTRIC FENCE SYSTEMS LIKE: Pet Stop®, PetSafe®, Pet Guardian®, Invisible Fence ™ ®, DogWatch® and Dog Guard®.