TheFreedomFence.com now offers installation, repair and servicing of All Brands of pet and dog fence systems in Fort Langley BC and Western Canada. Choosing the right underground dog fence for your dog can be confusing because of the wide variety of electronic pet fences available. A quality in-ground dog fence is sold by Pet Stop®, PetSafe®, Pet Guardian®, Invisible Fence ™ ®, DogWatch®, Dog Guard®, Innotek®, and DogTek® and comes in different styles for different types of dogs and are ideal for climate found in and around Fort Langley BC.
Even though an invisible, underground, wireless or other electric dog fence systems cannot be seen or touched, they do a fairly good job in keeping your dog safe within the exterior areas of your demarcated property. These unique dog containment systems are designed to prevent your dog from straying, being a nuisance to your neighbors and staying safe from accidents or attacks by other animals. It is not only an innovative way to keep your dog safe, but will also save you a lot of money compared to installing a traditional fence in Fort Langley BC. Moreover, they will also give your home and garden a cleaner, more aesthetic look.
If you find that a traditional fence is beyond your budget, or if such a fence contravenes rules laid down by your neighborhood community, then installing any type of invisible dog fencing system would be the best option. There are some highly effective fences available today, so you can easily choose one that suits your needs and budget.
One of the most popular options available today is the “radio electric” dog fence. It is designed for the sole purpose of deterring your dog from moving out of the demarcated areas of your Fort Langley BC property or acreage. The invisible dog fence involves the use of two main components – a transmitter and a receiver (radio collar).
Our Current Dog Fencing Product & Service Offerings in Fort Langley BC include: Wireless Dog Fencing, Dog Fence Underground, Electric Dog Fence For Large Dog, Invisible Fencing For Dogs, Wireless Invisible Dog Fence, Wireless Invisible Dog Fence, Invisible Fence Cats, Invisible Electric Fence For Dogs, Underground Dog Fencing, Hidden Dog Fence, Invisible Dog Fence Companies, Cat Invisible Fence, Invisible Dog Fence Installation, Electronic Fencing For Dogs, Invisible Pet Fence, Large Dog Invisible Fence, Outdoor Containment Fence For Dogs, Invisible Fence Alternative, Cat Containment System, Wireless Invisible Fence For Dogs, Perimeter Wireless Dog Fence, Dog Containment Collar, Invisible Dog Fence Installation, Wireless Dog Fencing, Invisible Dog Fencing, Small Dog Invisible Fence
How the Dog Fences Works?
The fence has an electric wire fitted with a transmitter and installed underground all around the borders of your acreage or Fort Langley BC property. This fence system works by giving out a beeping signal which is received by your dog’s radio collar, each time it (the dog) gets too close to the fence. If your dog continues to ignore the signals, a mild static shock is delivered via its collar to stop it from crossing the fence. However, the shock frequency can be adjusted to limit fear or harm to your dog.
Are Electronic Dog Fences Legal in Fort Langley BC?
With over 100 million dogs in America, keeping some pooches in, and others out requires commitment, a grasp of your dog's true character, and an eye for the pet containment innovations emerging from the digital age. Dog containment fence technologies range from the Paleolithic stone-and-timber walls, include a range of underground pet fencing ideas, and finishing with the avant guard radio and wireless pet fencing.
In Ground Dog Fence - Basic Stuff To Know About. Underground pet fences rely on a 4-part system in order to establish a true safety zone for doggies.
1. Hard Wires. Narrow gauge - small diameter solid copper wires, insulated and weather-protected via an outer plastic sheathing, constitute the "circuit", through which the signal travels. In ground pet fencing wire spools typically carry up and over 200 ft. of wire. Installation is simple. Carefully mark-off the actual perimeter line that marks the "safe zone" boundaries for your doggies. Next, a small hand-size trowel is all you'll need to slice through grass, or to dig a small 3inch trench into which the wire will be set. At any "join" area, or where you've had 2 wires intersect, you'll need to simply remove wire insulation for about 2 inches, then twist the two ends together, sealed by a connection threaded cap. Result? You get a solid connection, plus weather resistant underground electric dog fence that can carry a steady training signal for years.
2. Transmitter Unit. Normally a simple plug-in device, the underground dog fence transmitter sends out a continuous signal pulsing through the underground perimeter wire. Result? A tunnel shaped invisible "barrier" is created, leaving an interior "safety zone" for Rover, Daisy or Rin Tin Tin to play within. The electronic pet fence is designed to create a low-impact, easy-to-install and effective pet containment system to keep your dogs safe but space-constrained.
3. Collar Receiver Units. A light weight weather resistant collar is the "messenger" part of the underground dog fence system, where the "action" and training occurs. A simple receiver technology, the underground pet fence collar and controller transmitter can be calibrated or powered up or powered down, in order increase the radius of the "beware don't enter" zone along the perimeter line. After training, dogs quickly learn that the "beep beep beep" sound radiating form their collar means "stay away"... or receive a low voltage shock from the collar's pins, which butt up onto the dog's neck. Don't worry, there's no physical harm or impairment caused by the "corrective" shock, rather your dog experiences a startling sensation which effectively trains, and reminds her where the boundary line exists.
4. And Your Dog. No underground pet fence would be complete without a dog or two to complete the system. Training is gentle, lasting only 10 minutes or so on several sessions, with your dog on a leash, wearing the collar... listening for the tell-tale "beeps" near the line of warning flags inserted into the ground, acting as a visual cue. Gentle walking, coaxing your dog with words of encouragement, leading her gently towards the barrier until the rapid "beeping" followed by a short corrective shock occur. No surprise that mentally nimble situation-solving dogs quick deduce the "meaning" of this newly installed underground do fence, and quickly learn to stay within the "safe zone".
Underground Pet Fences Versus Radio Pet Fencing. Wires, digging and installation, completing quality wire hook-ups at the transmitter end of the underground dog fence impose a level of work and attention to detail not necessary with the plug-and-play wireless dog fencing systems. True, wireless may cost a little more... and you might find that materials or signal interrupts lead to "dead zones" where a dog could escape... a situation less likely with hard-wired underground electric dog fence set-ups.
Underground Pet Fencing Ideas And In Ground Dog Fence Installation Advice For Families With Dogs.
Dog Fences for Appealing Safety
Electronic dog fences are becoming a very popular solution to the problem of wandering dogs. There are now literally dozens of different brands and models available, some are very high quality and some are simply rubbish. All of the systems available are potential nightmares when they fail to work as you expected. In most cases there is a simple fix for your problem. A few simple tests are all you need to find and correct the fault.
Fault finding in an electronic fence can be a frustrating and time-consuming exercise as often the problem is a combination of faults. Imagine trying to find a bad connection of the boundary wire to the controller by using a collar with a low battery. This will give all sorts of false and confusing results. The way to tackle your problem is to break the fence system down into its 3 main parts and then test each part separately. The 3 parts we will be testing are:
Transmitter or Controller
The best way to test your transmitter is to disconnect your boundary wire and connect at least 30 feet (10 meters) of new wire. Lay the wire out in a circle and make sure to twist the last 3 feet (1 meter) before it connects to the transmitter. Turn on the transmitter and check the "power LED" is illuminated. If the power LED does not come on you have 1 of 2 problems. The power supply (usually a 12 volt plug pack) unit has failed or the transmitter is faulty. If you have a multimeter you can test the output from the power supply to determine if it is working. It is also a good idea to test the power supply in a different power outlet.
The transmitter should also have the "loop indicator " illuminated. An illuminated power LED but no illuminated loop indicator LED indicates the transmitter is faulty and needs to be replaced or returned for repairs. Double check that you have stripped enough insulation from the ends of the boundary wires and that they are making a good contact with the transmitter.
The next step is to disconnect one of the boundary wires, this should produce the break indicator warning, normally a flashing light and an audible alarm tone. If you do not get an alarm to indicate a wire break, the transmitter is faulty.
Now that we know the transmitter is working we can reconnect the boundary wire. The boundary wire is the simplest of all to test but the most frustrating to fix. The transmitter power LED and the loop indicator LED should be illuminated. A break indicator alarm will confirm that the boundary wire has been broken. Your problem now is to find the break in the wire, if the wire has been buried this can be a difficult exercise. Locating and repairing a wire break will be covered in a future article.
The first thing to do when testing a collar is to replace the battery with a fresh one. In the case of rechargeable collars this can be a difficult and expensive exercise. Make sure the collar is fully charged and is holding it's charge, rechargeable batteries do not last forever and often they have a life span of less than 18 months. Low or flat batteries will result in confusing and inconsistent performance.
Test the collar on a straight section of your fence that is well away from the controller. Approach the fence while holding the collar in your hand.
The orientation and height of the collar above the ground can make a big difference to its response distance. Hold the collar with the probes at 45 degrees to horizontal and at roughly the same height from the ground as it would be when the dog is wearing it. The collar should sound a warning as you approach the wire. Common problems are listed below.
The collar has to be held on top of the boundary wire to activate:
Adjust the boundary width control knob on the transmitter to increase the distance from the boundary wire that the collar activates. If your transmitter has a Boundary Control Switch, adjust it to another setting. Make sure your boundary wire loop is separated by at least 3 feet (1 meter).
The collars give an inconsistent response:
Make sure your transmitter is located well away from large metal objects like freezers and washing machines. Check that your boundary wire corners are gradual as sharp corners will cancel the signal. Make sure the boundary wire is not running parallel to and within 4-6 feet (2 meters) of underground electrical cables, telephone lines, neighboring electronic fences, etc.
The dog is not responding to correction:
Test the collar with the supplied test light to make sure it is working correctly.
Adjustable collars may be set to low for your dog, increase the level setting.
Adjust the collar fit.
Shave the area of the dog's skin that is in contact with the probes.
Try longer probes especially on long-haired dogs.
Following the steps above should enable you to identify which part of your system is at fault and allow you to take appropriate action. It is very important that a faulty fence system is repaired as quickly as possible. A faulty or inconsistent fence will quickly lose your dogs respect and retraining a dog can be very difficult.
http://thefreedomfence.com/british-columbia/ – TheFreedomFence.com now offers installation, repair and servicing of All Brands of pet and dog fence systems in Fort Langley BC. WE PROUDLY SERVICE ALL BRANDS OF ELECTRIC FENCE SYSTEMS LIKE: Pet Stop®, PetSafe®, Pet Guardian®, Invisible Fence ™ ®, DogWatch® and Dog Guard®.