TheFreedomFence.com now offers installation, repair and servicing of All Brands of pet and dog fence systems in Vauxhall AB and Western Canada. Choosing the right underground dog fence for your dog can be confusing because of the wide variety of electronic pet fences available. A quality in-ground dog fence is sold by Pet Stop®, PetSafe®, Pet Guardian®, Invisible Fence ™ ®, DogWatch®, Dog Guard®, Innotek®, and DogTek® and comes in different styles for different types of dogs and are ideal for climate found in and around Vauxhall AB.
Even though an invisible, underground, wireless or other electric dog fence systems cannot be seen or touched, they do a fairly good job in keeping your dog safe within the exterior areas of your demarcated property. These unique dog containment systems are designed to prevent your dog from straying, being a nuisance to your neighbors and staying safe from accidents or attacks by other animals. It is not only an innovative way to keep your dog safe, but will also save you a lot of money compared to installing a traditional fence in Vauxhall AB. Moreover, they will also give your home and garden a cleaner, more aesthetic look.
If you find that a traditional fence is beyond your budget, or if such a fence contravenes rules laid down by your neighborhood community, then installing any type of invisible dog fencing system would be the best option. There are some highly effective fences available today, so you can easily choose one that suits your needs and budget.
One of the most popular options available today is the “radio electric” dog fence. It is designed for the sole purpose of deterring your dog from moving out of the demarcated areas of your Vauxhall AB property or acreage. The invisible dog fence involves the use of two main components – a transmitter and a receiver (radio collar).
Our Current Dog Fencing Product & Service Offerings in Vauxhall AB include: Wireless Dog Fencing, Dog Fence Underground, Electric Dog Fence For Large Dog, Invisible Fencing For Dogs, Wireless Invisible Dog Fence, Wireless Invisible Dog Fence, Invisible Fence Cats, Invisible Electric Fence For Dogs, Underground Dog Fencing, Hidden Dog Fence, Invisible Dog Fence Companies, Cat Invisible Fence, Invisible Dog Fence Installation, Electronic Fencing For Dogs, Invisible Pet Fence, Large Dog Invisible Fence, Outdoor Containment Fence For Dogs, Invisible Fence Alternative, Cat Containment System, Wireless Invisible Fence For Dogs, Perimeter Wireless Dog Fence, Dog Containment Collar, Invisible Dog Fence Installation, Wireless Dog Fencing, Invisible Dog Fencing, Small Dog Invisible Fence
How the Dog Fences Works?
The fence has an electric wire fitted with a transmitter and installed underground all around the borders of your acreage or Vauxhall AB property. This fence system works by giving out a beeping signal which is received by your dog’s radio collar, each time it (the dog) gets too close to the fence. If your dog continues to ignore the signals, a mild static shock is delivered via its collar to stop it from crossing the fence. However, the shock frequency can be adjusted to limit fear or harm to your dog.
Are Electronic Dog Fences Legal in Vauxhall AB?
Electric dog fencing/cat fencing is the perfect way to keep your dog or cat safe and secure in the yard without having to put up expensive fencing. It might be that you live in a neighborhood that doesn't allow traditional fencing to be erected. Whatever the reason, electric dog fencing is a low-cost but extremely viable solution in keeping your pet safe without the need to hamper the view in any way. What's more is that it can cover a very large area making the system very flexible.
There are essentially two types of electric dog fence, one utilizes an underground wire system, while the other is more portable, but both work on a similar principle in that both send out a signal to a receiver collar the dog or cat wears. When your pet gets too close to the boundary, the receiver collar gives the pet a safe and effective correction, thus keeping the dog or cat safe in to the yard. It is strongly recommended that the dog or cat is trained as to where the boundaries are and with both systems small flags that can be stuck into the ground are provided. These are used to mark out the path of the boundary so you know where it is and to aid training. Anyway, this article will describe both systems.
The wired system or underground fence is the less expensive of the two and is usually buried 1 to 2 inches below ground around the perimeter of the yard. The wired fence can also be installed above ground with the use of sod staples. The wire starts and finishes at a transmitter which needs to be placed in a shed or garage, or any other place that protects it from the elements. It also requires a power source. The containment area covered by the fence could be a typical suburban yard or vast acreage depending on the model purchased. Imagine the cost of erecting a traditional fence for that area! Once set up, the dog wears the receiver collar and as it draws close to the wire marking the boundary, it receives a signal from the transmitter that corrects the dog and brings him back into the yard.
The second option is the so-called wireless system. This is much easier to install in that there's no digging for wire to be laid. Plug this system in, set the boundary range and you're ready to start training. It is also much more flexible as it allows you to change the range as you need to. It is slightly more expensive than the hard- wired system, but its portability means you could take it along with your dog on a camping vacation, or wherever you may be traveling. If you have a lot of land, you can also purchase additional transmitters and increase the range.
Basically, how this system works is it will cover a radial area of say 30 feet up to ¾ of an acre depending on the particular unit you purchase. As the dog approaches the limits of the range, the signal between collar and transmitter grows weaker until such a time the collar activates and corrects the dog, again bringing it back within the boundary.
Whichever system of dog or cat fencing you decide upon, you can be sure that either system will provide a low-cost and efficient alternative to traditional fencing and that your dog will be kept contained, safe and sound.
Invisible Dog Fence: A Safe Way to Fence Your Dog
Fixing a break in your Invisible Dog Fence or Underground Dog Fence is cheap and easy. You will periodically get breaks in the boundary line of your dog fence. You will know that the line is broken because the dog fence transmitter unit attached to your house will signal an error by either a flashing red light or a beeping noise. You will also notice that your dog's receiver collars no longer work and will not beep when you take them over the boundary line.
The boundary wire for your underground dog fence needs to make a complete loop, beginning and ending at the transmitter unit. When you get a break in the loop the signals cannot get through and the unit stops working. Our job is to find the break in the boundary wire and fix it. Before you start you need to remove the receiver collars from your dogs.
Here are the tools you will need for this DIY voyage:
- One 100 µH RF Choke (available from Radioshack (catalog number 273-102)) - $1.39
- One waterproof wire nut (available from most home improvement or hardware stores) - $0.39
- One AM radio - any portable AM radio will do, tuned to 600.
- One pair of scissors
- One Shovel or anything else you can dig with
Time: 30 minutes
There are two ways to find the break, we start with the easiest way:
Finding a Break by Visual Inspection
Most breaks are caused by someone running an edger, aerator or otherwise digging through the boundary wire. These breaks can usually be found by walking along where the boundary wire runs and looking for spots where there has been recent digging. Unearth the wire in these spots and check for damage. The most likely spots are where the boundary wire crosses your driveway or pathways. Also check that the boundary wire is properly connected to the transmitter box.
If you found the break, proceed to the section on fixing the break. If not, proceed to the following section where we will show you how to use an RF Choke to make the boundary wire 'sing' and reveal the location of the break to you.
RF Choke Method
The RF Choke will make your boundary wire 'sing.' We will be able to listen to this sound with the AM radio you have tuned to 600 and will be able to find the break by looking for the part of the wire that is not singing.
First switch off the transmitter box. Now, disconnect the two boundary wire leads that connect to the box. In their place, connect the two legs of the RF choke. Now turn the transmitter box back on. The transmitter box should no longer be signalling that there is an error.
Now turn the transmitter box back off. Take the two boundary wires and wrap an insulated section of each wire around different legs of the RF choke. Now turn the transmitter box back on. The transmitter should still signal that there is no error. Rotate the knob labeled "field width" on the transmitter box clockwise till it is at full power.
Now turn on the radio tuned to AM 600, and walk along the boundary wire. When you hold the radio near the boundary wire it should make a deep pulsing/throbbing noise, like Ugh-Ugh-Ugh-Ugh-Ugh ... As you move the radio closer and further away from the boundary wire you will notice that there are some distances where the sound is louder and some distances where it gets quieter. As you walk around the boundary you will find a spot where there is no sound coming from the AM radio irrespective of whether you move the radio closer or further from the boundary wire. This is where you should dig up the wire and look for the break. It will be within three yards of the quiet spot
Now that you have done the hard part let's fix the break
Fixing the Break
Use the scissors to strip the wire on each side of the break in the boundary wire. Now insert the two stripped sections into the wire nut and gently twist until you start to get a bit of resistance from the wire nut. Now we will test to see if you have fixed the problem.
Return to the transmitter unit and turn off the power. Disconnect the RF choke legs and reconnect the boundary wire. Power back on the transmitter and there should be no error signal. If there is an error signal, look for another break, it is possible that there was more than one. If there was no error signal, bury the boundary wire you dug up. Reset the "field width" knob on the transmitter box to it's original setting and you are done. Congratulations you just saved yourself a house call from the local Underground Dog Fence company and a large bill!
http://thefreedomfence.com/alberta/ – TheFreedomFence.com now offers installation, repair and servicing of All Brands of pet and dog fence systems in Vauxhall AB. WE PROUDLY SERVICE ALL BRANDS OF ELECTRIC FENCE SYSTEMS LIKE: Pet Stop®, PetSafe®, Pet Guardian®, Invisible Fence ™ ®, DogWatch® and Dog Guard®.