Wireless Invisible Fence For Dogs Port Alberni BC

TheFreedomFence.com now offers installation, repair and servicing of All Brands of pet and dog fence systems in Port Alberni BC and Western Canada. Choosing the right underground dog fence for your dog can be confusing because of the wide variety of electronic pet fences available. A quality in-ground dog fence is sold by Pet Stop®, PetSafe®, Pet Guardian®, Invisible Fence ™ ®, DogWatch®, Dog Guard®, Innotek®, and DogTek® and comes in different styles for different types of dogs and are ideal for climate found in and around Port Alberni BC.

Dog Fence Installation

 

Even though an invisible, underground, wireless or other electric dog fence systems cannot be seen or touched, they do a fairly good job in keeping your dog safe within the exterior areas of your demarcated property. These unique dog containment systems are designed to prevent your dog from straying, being a nuisance to your neighbors and staying safe from accidents or attacks by other animals. It is not only an innovative way to keep your dog safe, but will also save you a lot of money compared to installing a traditional fence in Port Alberni BC. Moreover, they will also give your home and garden a cleaner, more aesthetic look.

If you find that a traditional fence is beyond your budget, or if such a fence contravenes rules laid down by your neighborhood community, then installing any type of invisible dog fencing system would be the best option. There are some highly effective fences available today, so you can easily choose one that suits your needs and budget.

One of the most popular options available today is the “radio electric” dog fence. It is designed for the sole purpose of deterring your dog from moving out of the demarcated areas of your Port Alberni BC property or acreage. The invisible dog fence involves the use of two main components – a transmitter and a receiver (radio collar).

Hidden Fence For Dogs

 

Our Current Dog Fencing Product & Service Offerings in Port Alberni BC include: Wireless Dog Fencing, Dog Fence Underground, Electric Dog Fence For Large Dog, Invisible Fencing For Dogs, Wireless Invisible Dog Fence, Wireless Invisible Dog Fence, Invisible Fence Cats, Invisible Electric Fence For Dogs, Underground Dog Fencing, Hidden Dog Fence, Invisible Dog Fence Companies, Cat Invisible Fence, Invisible Dog Fence Installation, Electronic Fencing For Dogs, Invisible Pet Fence, Large Dog Invisible Fence, Outdoor Containment Fence For Dogs, Invisible Fence Alternative, Cat Containment System, Wireless Invisible Fence For Dogs, Perimeter Wireless Dog Fence, Dog Containment Collar, Invisible Dog Fence Installation, Wireless Dog Fencing, Invisible Dog Fencing, Small Dog Invisible Fence

How the Dog Fences Works?

The fence has an electric wire fitted with a transmitter and installed underground all around the borders of your acreage or Port Alberni BC property. This fence system works by giving out a beeping signal which is received by your dog’s radio collar, each time it (the dog) gets too close to the fence. If your dog continues to ignore the signals, a mild static shock is delivered via its collar to stop it from crossing the fence. However, the shock frequency can be adjusted to limit fear or harm to your dog.

 

Are Electronic Dog Fences Legal in Port Alberni BC?

Invisible Dog Fence System

 

Electronic dog fences are becoming a very popular solution to the problem of wandering dogs. There are now literally dozens of different brands and models available, some are very high quality and some are simply rubbish. All of the systems available are potential nightmares when they fail to work as you expected. In most cases there is a simple fix for your problem. A few simple tests are all you need to find and correct the fault.

Fault finding in an electronic fence can be a frustrating and time-consuming exercise as often the problem is a combination of faults. Imagine trying to find a bad connection of the boundary wire to the controller by using a collar with a low battery. This will give all sorts of false and confusing results. The way to tackle your problem is to break the fence system down into its 3 main parts and then test each part separately. The 3 parts we will be testing are:

Transmitter or Controller

Boundary Wire

Collar Receiver

Transmitter.

The best way to test your transmitter is to disconnect your boundary wire and connect at least 30 feet (10 meters) of new wire. Lay the wire out in a circle and make sure to twist the last 3 feet (1 meter) before it connects to the transmitter. Turn on the transmitter and check the "power LED" is illuminated. If the power LED does not come on you have 1 of 2 problems. The power supply (usually a 12 volt plug pack) unit has failed or the transmitter is faulty. If you have a multimeter you can test the output from the power supply to determine if it is working. It is also a good idea to test the power supply in a different power outlet.

The transmitter should also have the "loop indicator " illuminated. An illuminated power LED but no illuminated loop indicator LED indicates the transmitter is faulty and needs to be replaced or returned for repairs. Double check that you have stripped enough insulation from the ends of the boundary wires and that they are making a good contact with the transmitter.

The next step is to disconnect one of the boundary wires, this should produce the break indicator warning, normally a flashing light and an audible alarm tone. If you do not get an alarm to indicate a wire break, the transmitter is faulty.

Boundary Wire.

Now that we know the transmitter is working we can reconnect the boundary wire. The boundary wire is the simplest of all to test but the most frustrating to fix. The transmitter power LED and the loop indicator LED should be illuminated. A break indicator alarm will confirm that the boundary wire has been broken. Your problem now is to find the break in the wire, if the wire has been buried this can be a difficult exercise. Locating and repairing a wire break will be covered in a future article.

Receiver Collars.

The first thing to do when testing a collar is to replace the battery with a fresh one. In the case of rechargeable collars this can be a difficult and expensive exercise. Make sure the collar is fully charged and is holding it's charge, rechargeable batteries do not last forever and often they have a life span of less than 18 months. Low or flat batteries will result in confusing and inconsistent performance.

Test the collar on a straight section of your fence that is well away from the controller. Approach the fence while holding the collar in your hand.

The orientation and height of the collar above the ground can make a big difference to its response distance. Hold the collar with the probes at 45 degrees to horizontal and at roughly the same height from the ground as it would be when the dog is wearing it. The collar should sound a warning as you approach the wire. Common problems are listed below.

The collar has to be held on top of the boundary wire to activate:

Adjust the boundary width control knob on the transmitter to increase the distance from the boundary wire that the collar activates. If your transmitter has a Boundary Control Switch, adjust it to another setting. Make sure your boundary wire loop is separated by at least 3 feet (1 meter).

The collars give an inconsistent response:

Make sure your transmitter is located well away from large metal objects like freezers and washing machines. Check that your boundary wire corners are gradual as sharp corners will cancel the signal. Make sure the boundary wire is not running parallel to and within 4-6 feet (2 meters) of underground electrical cables, telephone lines, neighboring electronic fences, etc.

The dog is not responding to correction:

Test the collar with the supplied test light to make sure it is working correctly.

Adjustable collars may be set to low for your dog, increase the level setting.

Adjust the collar fit.

Shave the area of the dog's skin that is in contact with the probes.

Try longer probes especially on long-haired dogs.

Following the steps above should enable you to identify which part of your system is at fault and allow you to take appropriate action. It is very important that a faulty fence system is repaired as quickly as possible. A faulty or inconsistent fence will quickly lose your dogs respect and retraining a dog can be very difficult.

 

Pet Safe Wireless Dog Fences

Perimeter Dog Collar

 

Do you have a dog that likes to walk away from your house when left alone? A large variety of dogs, especially sporting breeds, enjoy running around in wide-open areas and for miles on end Many of these dogs will typically find ways to get out of fenced in areas and other containment areas. If the yard you have is not yet fenced, and you are thinking this is the cause your dog runs away so often, it can be very expensive to build one, and quite frustrating to see your dog still escaping. If you don't like the old fashioned physical fences, regardless the material they are built from, you can consider the new options offered due to technological development. One of the best options you have is the modern electronic dog fence, that works effectively and is very easy to use.

You don't have to worry about the installation of the electronic dog fence, just establish a proper perimeter for your dog to stay in, and a professional company will take care of the rest. Several sensors are placed around the fenced in area that interact with the specialized dog collar used for the fence. Whenever your dog gets close to one of these sensors, the collar will start to beep in order to warn your dog to turn back now. But if the dog continues to close to the line the sensors are installed, the collar will deliver it a slight electric shock to stop him. As the dogs are very intelligent animals and they don't like the sensation the electric shock is inducing, after two or three shocks will learn to back up when they hear the warning beep.

Some people say this is not a humane treatment. However, the technology has been refined to be completely dog friendly. You are able to set the shock level with the shock setting on the collar. Most dog owners will test the collar themselves to ensure that their dog is not going to get hurt. But even at the highest level this shock is merely similar to the static built up shock we all experienced. It's just startling the dog, it doesn't really hurt him. This shock is more surprising than painful.

And you will consider it humane if you will compare it to the injuries your dog is prone to if he wanders around free on the streets in your city. Your dog is better protected inside one of these fences and getting a few shocks at first than having a yard your dog can get out of to roam the streets and fields unsupervised.

Any of the thousands of dog and electronic dog fence owners can testify that. They can let their dog outside in a seemingly open field without worrying about their pet running off and getting hurt or worse. The price of the electronic dog fence is fairly covered by the safety of your dog. You can easily set up and use this device. You just need to try it. Allow your dog the freedom of running about without a leash today.


http://thefreedomfence.com/british-columbia/ – TheFreedomFence.com now offers installation, repair and servicing of All Brands of pet and dog fence systems in Port Alberni BC. WE PROUDLY SERVICE ALL BRANDS OF ELECTRIC FENCE SYSTEMS LIKE: Pet Stop®, PetSafe®, Pet Guardian®, Invisible Fence ™ ®, DogWatch® and Dog Guard®.