TheFreedomFence.com now offers installation, repair and servicing of All Brands of pet and dog fence systems in Port Moody BC and Western Canada. Choosing the right underground dog fence for your dog can be confusing because of the wide variety of electronic pet fences available. A quality in-ground dog fence is sold by Pet Stop®, PetSafe®, Pet Guardian®, Invisible Fence ™ ®, DogWatch®, Dog Guard®, Innotek®, and DogTek® and comes in different styles for different types of dogs and are ideal for climate found in and around Port Moody BC.
Even though an invisible, underground, wireless or other electric dog fence systems cannot be seen or touched, they do a fairly good job in keeping your dog safe within the exterior areas of your demarcated property. These unique dog containment systems are designed to prevent your dog from straying, being a nuisance to your neighbors and staying safe from accidents or attacks by other animals. It is not only an innovative way to keep your dog safe, but will also save you a lot of money compared to installing a traditional fence in Port Moody BC. Moreover, they will also give your home and garden a cleaner, more aesthetic look.
If you find that a traditional fence is beyond your budget, or if such a fence contravenes rules laid down by your neighborhood community, then installing any type of invisible dog fencing system would be the best option. There are some highly effective fences available today, so you can easily choose one that suits your needs and budget.
One of the most popular options available today is the “radio electric” dog fence. It is designed for the sole purpose of deterring your dog from moving out of the demarcated areas of your Port Moody BC property or acreage. The invisible dog fence involves the use of two main components – a transmitter and a receiver (radio collar).
Our Current Dog Fencing Product & Service Offerings in Port Moody BC include: Wireless Dog Fencing, Dog Fence Underground, Electric Dog Fence For Large Dog, Invisible Fencing For Dogs, Wireless Invisible Dog Fence, Wireless Invisible Dog Fence, Invisible Fence Cats, Invisible Electric Fence For Dogs, Underground Dog Fencing, Hidden Dog Fence, Invisible Dog Fence Companies, Cat Invisible Fence, Invisible Dog Fence Installation, Electronic Fencing For Dogs, Invisible Pet Fence, Large Dog Invisible Fence, Outdoor Containment Fence For Dogs, Invisible Fence Alternative, Cat Containment System, Wireless Invisible Fence For Dogs, Perimeter Wireless Dog Fence, Dog Containment Collar, Invisible Dog Fence Installation, Wireless Dog Fencing, Invisible Dog Fencing, Small Dog Invisible Fence
How the Dog Fences Works?
The fence has an electric wire fitted with a transmitter and installed underground all around the borders of your acreage or Port Moody BC property. This fence system works by giving out a beeping signal which is received by your dog’s radio collar, each time it (the dog) gets too close to the fence. If your dog continues to ignore the signals, a mild static shock is delivered via its collar to stop it from crossing the fence. However, the shock frequency can be adjusted to limit fear or harm to your dog.
Are Electronic Dog Fences Legal in Port Moody BC?
Electronic dog fences are becoming a very popular solution to the problem of wandering dogs. There are now literally dozens of different brands and models available, some are very high quality and some are simply rubbish. All of the systems available are potential nightmares when they fail to work as you expected. In most cases there is a simple fix for your problem. A few simple tests are all you need to find and correct the fault.
Fault finding in an electronic fence can be a frustrating and time-consuming exercise as often the problem is a combination of faults. Imagine trying to find a bad connection of the boundary wire to the controller by using a collar with a low battery. This will give all sorts of false and confusing results. The way to tackle your problem is to break the fence system down into its 3 main parts and then test each part separately. The 3 parts we will be testing are:
Transmitter or Controller
The best way to test your transmitter is to disconnect your boundary wire and connect at least 30 feet (10 meters) of new wire. Lay the wire out in a circle and make sure to twist the last 3 feet (1 meter) before it connects to the transmitter. Turn on the transmitter and check the "power LED" is illuminated. If the power LED does not come on you have 1 of 2 problems. The power supply (usually a 12 volt plug pack) unit has failed or the transmitter is faulty. If you have a multimeter you can test the output from the power supply to determine if it is working. It is also a good idea to test the power supply in a different power outlet.
The transmitter should also have the "loop indicator " illuminated. An illuminated power LED but no illuminated loop indicator LED indicates the transmitter is faulty and needs to be replaced or returned for repairs. Double check that you have stripped enough insulation from the ends of the boundary wires and that they are making a good contact with the transmitter.
The next step is to disconnect one of the boundary wires, this should produce the break indicator warning, normally a flashing light and an audible alarm tone. If you do not get an alarm to indicate a wire break, the transmitter is faulty.
Now that we know the transmitter is working we can reconnect the boundary wire. The boundary wire is the simplest of all to test but the most frustrating to fix. The transmitter power LED and the loop indicator LED should be illuminated. A break indicator alarm will confirm that the boundary wire has been broken. Your problem now is to find the break in the wire, if the wire has been buried this can be a difficult exercise. Locating and repairing a wire break will be covered in a future article.
The first thing to do when testing a collar is to replace the battery with a fresh one. In the case of rechargeable collars this can be a difficult and expensive exercise. Make sure the collar is fully charged and is holding it's charge, rechargeable batteries do not last forever and often they have a life span of less than 18 months. Low or flat batteries will result in confusing and inconsistent performance.
Test the collar on a straight section of your fence that is well away from the controller. Approach the fence while holding the collar in your hand.
The orientation and height of the collar above the ground can make a big difference to its response distance. Hold the collar with the probes at 45 degrees to horizontal and at roughly the same height from the ground as it would be when the dog is wearing it. The collar should sound a warning as you approach the wire. Common problems are listed below.
The collar has to be held on top of the boundary wire to activate:
Adjust the boundary width control knob on the transmitter to increase the distance from the boundary wire that the collar activates. If your transmitter has a Boundary Control Switch, adjust it to another setting. Make sure your boundary wire loop is separated by at least 3 feet (1 meter).
The collars give an inconsistent response:
Make sure your transmitter is located well away from large metal objects like freezers and washing machines. Check that your boundary wire corners are gradual as sharp corners will cancel the signal. Make sure the boundary wire is not running parallel to and within 4-6 feet (2 meters) of underground electrical cables, telephone lines, neighboring electronic fences, etc.
The dog is not responding to correction:
Test the collar with the supplied test light to make sure it is working correctly.
Adjustable collars may be set to low for your dog, increase the level setting.
Adjust the collar fit.
Shave the area of the dog's skin that is in contact with the probes.
Try longer probes especially on long-haired dogs.
Following the steps above should enable you to identify which part of your system is at fault and allow you to take appropriate action. It is very important that a faulty fence system is repaired as quickly as possible. A faulty or inconsistent fence will quickly lose your dogs respect and retraining a dog can be very difficult.
Invisible Dog Fence Brings Several Benefits to the Dog Owner
Is an underground dog fence right for you and your dog? As suburbs continue to pop up around major cities, homeowners' associations are being formed and they are busy drafting policies. One of the main policies that they are enforcing is to restrict the size, the type and even the very existence of fences due to aesthetic reasons. They do not like the visual clutter associated with conventional fences.
If you live in such a neighborhood or if you are just looking for a less expensive and more maintenance free way to protect your dog, an underground dog fence is a good choice. These fencing systems consist of three components: a transmitter, underground wiring and a receiver placed on your dog's collar.
Transmitter. This must be mounted in a dry location like a garage or a shed and it must be near an electrical outlet which it will plug into. The transmitter will then emit a radio signal that will travel through the underground wiring.
Underground Wiring. This is a single strand of insulated wire that starts at the transmitter, goes around your property and then ends back at the transmitter. If you are installing an underground dog fence yourself, it is best to use something (a hose or spray paint) to give yourself a visual idea of where you want the wiring to go. You can also enclose vegetable gardens and swimming pools, or any other area where you do not want your dog to roam.
Receiver. A receiver will come connected to a collar that is lightweight and waterproof. You do not have to use the collar that comes with the system; you will be able to take off the receiver and put it on a collar that you already have. The receiver will need a battery that will probably need replaced about every three months. Some receivers come with a rechargeable battery so this is a good thing to inquire about before you purchase a system.
An underground dog fence will not harm your dog. It is recommended by vets and national humane societies; however, you will have to take the time to train your dog. Most systems offer three operating modes: a warning, a warning and a correction and a correction only. A dog must be trained to retreat back into the yard when they hear this warning. You will be surprised though at how quickly your dog will adapt its behavior to heed the warning and not go any further than the area you have laid out for them to roam. The best way to train them is to keep them on a leash since this is something most dogs are used to and you will also have control over their actions. A training video should be included with the system you purchase.
Knowing that your dog (this system works for cats as well) is getting the exercise they need and knowing that they are also protected from running out into the street with an underground dog fence, will give you piece of mind while you are away from your home. It will also give your dog the freedom they need to stay healthy and happy
http://thefreedomfence.com/british-columbia/ – TheFreedomFence.com now offers installation, repair and servicing of All Brands of pet and dog fence systems in Port Moody BC. WE PROUDLY SERVICE ALL BRANDS OF ELECTRIC FENCE SYSTEMS LIKE: Pet Stop®, PetSafe®, Pet Guardian®, Invisible Fence ™ ®, DogWatch® and Dog Guard®.